background image

4       www.electrolux.com

Never operate your dryer without the lint filter.

Do not allow lint to build around your dryer.
A torn or damaged lint filter must be replaced 

immediately.

Overloading can increase lint build-up 

because the airflow is reduced.

1.3 Cleaning The Lint Filter

1.4 Drying Guide

LINT BUILD-UP IS A FIRE HAZARD

A clean lint filter reduces drying times, saves 

energy and avoids overheating. Overheating 

may also damage your clothes.

What happens If I forget to clean the lint filter?

You must clean this lint filter after every load.

Ensure the lint filter “Clicks” when replacing.

It can be inserted into the pocket only one way

Your load, when dry must not exceed the rated 

capacity

      6.0 kg for the EDV605HQWA Dryer

      7.0 kg for the EDV705HQWA Dryer

(See page 11 for a table of average weights

of laundry items)

      Always check your labels for the drying 

symbolwhich this international Care Labelling 

Code now uses.

Permanent press and synhetics

 - take out

as soon as the dryer stops to reduce wrinkles.

Woollen articles

 - not recommended. Pull 

themto their original shape, then dry them flat.

Woven and loop knit materials

 - may shrink, 

by varying amount, depending on their quality. 

Do not use the “Extra” setting for these fabrics, 

Always stretch them out immediately after 

drying.

Fibre or leather materials

 - always check the 

manufacturer’s instructions.

Baby clothes and night gowns

 - acrylic 

clothing or sleepwear use only on the “Iron” 

setting.

Rubber and plastics

 - Do not dry any items 

made from or containing rubber or plastics, 

such as aprons, bibs, babies’ water proof 

napkins, curtains, tablecloths, shower caps, 

clothes fitted with foam rubber pads, pillows, 

galoshes, or rubber coated tennis shoes.

Fibreglass

 - not recommended, glass 

particles left in the dryer could be picked up by 

your clothes the next time you use the dryer 

and irritate your skin.

Summary of Contents for EDV605HQWA
















Reviews: