11
ENGLISH
6. When drying is completed
When the selected degree of dryness has been
reached, the heating element switches off
automatically and the cooling phase is carried out (the
control light
is on). After about 10 minutes the anti-
crease phase follows (control lights
and
flash
alternatively).
Anticrease phase
If you do not remove the laundry at the end of the
programme (after the cooling phase), the machine will
automatically carry out an “anticrease” phase for
approx 30 mins. During this period the drum will rotate
at regular intervals to avoid creasing and the buzzer
will sound for 1 second every 10 seconds, unless you
have depressed the BUZZER OFF button. You can
remove the laundry at any time.
If you do not remove the laundry at this stage, the
machine will complete the anti-crease phase and then
will stop automatically: only the pilot light
will flash.
7. At the end of the programme
1. Turn the selector dial to “0”.
2. Switch the machine off by depressing the ON/OFF
button, the mains-on light will go out.
3. Clean the filter.
A clean filter ensures correct functioning of the
appliance.
125995195.qxp 2005-03-16 10:35 Page 11