9
ENGLISHENGLISH
Use
The control panel
1
2 3
4 5
6 7
8
1 Programme chart
This will help you to select the correct programme
for drying.
2 MainsON light
Comes on when the appliance is switched on
(ON/OFF button pressed down) and goes out when
this button is released.
3 ON/OFF button
This button is used to switch the dryer on. At the
end of the programme, release this button by
pressing it again to switch the dryer off.
4 Low temperature button
Pressing this button allows drying to be performed
at a lower temperature, for delicate items.
The corresponding pilot light comes on.
5 Buzzer OFF button
A buzzer sounds during the anticreasing phase.
Press this button when selecting the programme if
you wish to switch the buzzer off. The
corresponding light illuminates.
6 Start button
Press this button for about 2 seconds to start the
dryer after having selected the programme.
If the door is opened while the programme is
running, this button must be pressed again after
closing the door in order to restart the
programme from the point at which it was
interrupted.
This button must also be pressed after a power cut.
In both cases light
or
(depending on the
phase in progress) flashes to remind you that the
start button needs to be pressed again.
7 Programme phase indicator
lights
These lights indicate the various phases of the
programme as they are being performed.
“Drying” light
This light indicates that the appliance is in the
drying phase.
“Cooling” light
This light indicates that the appliance is in the
cooling phase. At the end of drying, there is a 10
minute cooling phase to cool the laundry.
If light
or
is flashing, this means that the
Start button needs to be pressed again for the
programme to resume.
“End of programme” light
This light flashes at the end of the cooling phase
and during the anticreasing phase.
125980052.qxp 2005-06-14 14:03 Page 9
