Electrolux EBGL6X, User Manual, Page: 27 / 32

INSTALLING THE OVEN UNDER A WORK SURFACE
A
A
A A
B
D
A
A
ca.50
435
600
160
20
A
757
A
767
N
762 + 3
N
780
A 548
N 550
170
WARNING!
Installation into flammable material
must agree with NIN SEV 1000
(Swiss Association of the Cantonal
Fire Insurance Companies) fire pro-
tection guidelines and regulations.
WARNING!
When installing next to a wood-fu-
elled boiler, a heatproof and heat-
insulating plate must be mounted
at the height of the appliance and
at least 30 cm deep.
A = appliance
N = recess
A B
min. 20
15
20
A
1. Pull the appliance drawer out as far as
it goes and remove it.
2. Use the side handles to hold the oven
and slide it flush into the recess.
CAUTION!
Make sure the cable is free when
you move the appliance.
3. Use a minimum of 2 screws to attach
the oven on the 2 sides (Detail A).
ELECTRICAL CONNECTION
Use a power cable of H05VV-F or higher.
Connect the appliance to a socket supply
line. If there is no socket supply line, the
electrical installation must have an isolation
device which lets you disconnect the appli-
ance from the power supply. The isolation
device must have a contact opening width
of minimum 3 mm (in reference to NIN SEV
1000). The customer must have a socket
for the electrical connection that is accessi-
ble and outside the coordination room. The
length of the connection cable must be ap-
proximately 120 cm with lines connected
directly to the power supply.
ENGLISH 27