5
www.electrolux.com
CNT
CNS
KR
ID
TH
VN
EN
GETTING STARTED
1.
Before first use.
Remove all adhesive remains and gently rub the iron with a dampened cloth. Rinse
the water tank to remove foreign particles. When turned on for the first time, temporary vapours/odours
may occur.
2.
Filling the steam iron with water.
Make sure that the plug is removed from the power outlet. Turn the
steam selector to “
” and open the filling aperture cover. Using the beaker provided, pour water up
to maximum level. Raise the tip of the iron to prevent the water from overflowing while pouring. Close
the cover.
This product is appropriate for use with tap water. It is recommended to use distilled water or a mix of
50% distilled, 50% tap water. Never use distilled water only. Never put scented water, vinegar or ironing
aids in the water tank. This may cause brown spitting and staining.
3.
Plug the power cable into a power outlet.
Turn the temperature selector to the desired heat. The power
indicator light indicates that the iron is heating up. When the light turns min, the iron is ready to be
used.
Note: If you lower the temperature during ironing, do not start again until the power indicator light turns
on.
4.
Iron with steam.
Turn the steam selector to a position between “
” and “
”, depending on the
quantity of steam required. To iron without steam, leave the steam selector on position “
”.
Note: The iron gives min steam continuously if you hold it horizontally. Stop the continuous steam by
placing the iron vertically or turning the steam selector to “
”.
5.
Using the spray mist and steam jet function.
Ensure that the water tank is at least 1/4 full. Use spray
mist to pre-dampen fabrics by pressing the spray button several times to release a fine mist. To use the
steam jet function, ensure that the tank is at least 1/2 full. Press the steam jet button several times to
prime pump.
6.
Steaming hanging items.
The vertical steam jet function is ideal for steaming curtains, suits and
delicate fabrics. Hang item on a hanger, hold the iron at a distance of 10–20 cm and press the steam
jet button.
7.
The appliance must be switched min before connecting or disconnecting the mains plug.
Never pull
the supply cord. Instead, grasp the plug and pull. Empty the water tank and let the iron cool completely
before storage.
CLEANING (DO NOT USE ANY DETERGENT)
8.
Always store the iron on its heel rest with the cord twisted loosley around the cable wrap facility.
To
clean exterior surfaces, use a damp soft cloth and wipe dry. Do not use any chemical solvents, as these
will damage the surface.
9.
Self-cleaning function.
Hold the iron over a sink. Fill the filling aperture with water. Heat up the iron.
Move the steam button to self-cleaning position, hold for 60 seconds to empty water from the steam
holes. Release the button to stop the self-cleaning function.
10.
Cleaning the soleplate.
Do not use scouring pads or harsh cleaners on the soleplate as these will
damage the surface. To remove burnt residue, iron over a damp cloth while the iron is still hot. To clean
the soleplate, simply wipe with a soft damp cloth and wipe dry.
SAFETOUCH HOT SOLEPLATE INDICATOR*
11.
Your appliance is equipped with SafeTouch
hot soleplate indicator which detects when the soleplate
is hot by changing its colour from black to red. Once the temperature of the soleplate is <40°C, the
colour changes back to black to show that the iron is ready to be stored away.
*Specifications vary by model
