1.Place the machine on a flat surface
and fill the tank with cold water. (The
machine must not be used with empty tank!)
Plug the power cord into the mains and press
the ON button.
2.When starting the machine for the
first time,
first place a container under the
steam nozzle. Wait until the Ready indicator
light is steady.
Turn the selector dial to to rinse out the
steam nozzle. If the machine is not turned off
manually, the Safety Auto-Off function turns
it off after 30 minutes.
3.Then place a bowl on the drip grid.
Wait until the Ready indicator light is
steady. Without inserting the filter holder,
turn selector dial to .
Let a full tank of water pass through the
machine to rinse out the heating system.
4.Making an espresso:
The machine is
ready to use when the Ready indicator ligh
tis steady. Then follow the instructions in
step 5-7.
5.Fold back the finger protector and
put the filter in the filter holder.
Fill the
filter with ground coffee. Use the tamper on
the other side of the spoon to press ground
coffee lightly.
6.Insert the filter holder into position
as shown.
Turn the handle counterclock-
wise to tighten its position, see image.
Please note that too much force will shorten
the components lifespan. When the heating
is finished, turn the selector dial to .
Espresso begins to flow through the coffee
outlet- turn the selector dial to when you
have reached a desired amount.
7.After brewing,
remove the filter holder.
Twist it to the left and take it out of the
retainer. Fold finter protector forwards and
remove used coffee grounds from the filter.
Then take it out of the holder and clean it
with water. Dry with a cloth before putting
it back into the filter box.
Getting Started
Making an espresso
3
www.electrolux.com
CNT
CNT
