background image

As the programme is very quiet, it is

suitable for use at night time when

cheaper electricity tariffs are

available. In some programmes the

rinses are performed with more water.
If you touch the Start/Pause 

button, the appliance performs the

only draining phase.

The appliance empties

the water out

automatically after 18

hours approximately.

6.6 Prewash 

With this option you can add a prewash

phase to a washing programme.
The corresponding indicator above the

touch button illuminates.
• Use this option to add a pre-wash

phase at 30 °C before the washing

phase.

This option is recommended for

heavily soiled laundry, especially if

containing sand, dust, mud and other

solid particles.

The options can increase the

programme duration.

6.7 Stains 

Touch this button to add the stain phase

to a programme.
The corresponding indicator above the

touch button illuminates.
Use this option for laundry with hard

stains to remove.
When you set this option, put the stain
remover into compartment 

.

This option increases the

programme duration.

This option is not available

with a temperature lower

than 40 °C.

6.8 Permanent Extra Rinse 

With this option you can add a few rinses

according to the selected washing

programme.

Use this option for people with allergies

to detergent residues and with sensitive

skin.

This option increases the

programme duration.

The corresponding indicator above the

touch button illuminates and also stays

permanently on during next cycles until

this option is deactivated.

6.9 Permanent Soft Plus 

Set this option to optimise the fabric

softener distribution and improve fabric

softness.
Recommended when you use fabric

softener.

This option increases the

programme duration.

The corresponding indicator above the

touch button illuminates and also stays

permanently on during next cycles until

this option is deactivated.

6.10 Plus Steam 

This option adds a steam phase followed

by a short anti-crease phase at the end

of the washing programme.
The steam phase reduces fabric

creasing and facilitates the fabric ironing.
The corresponding indicator above the

touch button illuminates.

The indicator   is steady on during

steam phase.

This option can increase the

programme duration.

When the programme stops the display
shows 

, the indicator   goes off

and the indicator 

 is steady on. The

drum performs smooth movements for

about 30 minutes to keep the steam

benefit. By touching any button the anti-

crease movements stop and the door

unlocks.

A small laundry load helps to

reach better results.

www.electrolux.com

20

Summary of Contents for E784F303BI

















































Reviews: