background image

3

•  Remove all tape and packaging wrap 

before using the appliance. Destroy the 

carton and plastic bags after unpacking 

the appliance.

 Never allow children to play 

with packaging material. Do not remove the 

model/serial plate attached to the cooktop.

•  Proper Installation-Be sure your appliance 

is properly installed and grounded by a 

qualified technician in accordance with the 

National Fuel Gas Code ANSI Z223.1—latest 

edition in the United States, or in Canada 

CAN/CGA B149.1, and CAN/CGA B149.2, 

and the National Electrical Code ANSI/

NFPA No. 70—latest edition in United 

States, or in Canada CSA Standard C22.1, 

Canadian Electrical Code, Part 1, and local 

code requirements. 

Install and/or adjust only 

per installation instructions provided in the 

literature package for this cooktop.

What you need to know about safety instructions

Warning and Important Instructions appearing in this guide are not meant to cover all possible conditions 

and situations that may occur. Common sense, caution and care must be exercised when installing, 

maintaining or operating a microwave.

ALWAyS

 contact your dealer, distributor, service agent or manufacturer about problems or conditions 

you do not understand.

Recognize Safety Symbols, Words, Labels

WARNING

 — Hazards or unsafe practices which 

COULD

 result in severe personal injury or death.

If the information in this manual is not followed exactly, a fire or explosion may result causing 

property damage, personal injury or death.
FOR yOUR SAFETy:

—  Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any 

other appliance.

—  WHAT TO DO IF yOU SMELL GAS:

•  Do not try to light any appliance.

•  Do not touch any electrical switch; do not use any  phone in your building.

•  Immediately  call  your  gas  supplier  from  a  neighbor’s  phone.  Follow  the  gas  supplier’s 

instructions.

•  If you cannot reach your gas supplier, call the fire department.

—  Installation  and  service  must  be  performed  by  a  qualified  installer,  servicer  or  the  gas 

supplier.

CAUTION

 — Hazards or unsafe practices which 

COULD

 result in minor personal injury.

Important Safety Instructions

Ask  your  dealer  to  recommend  a  qualified 

technician  and  an  authorized  repair  service. 

Know how to shut off gas supply at the meter and 

disconnect the electrical power to the cooktop 

at the circuit breaker or fuse box in case of an 

emergency.

• User  servicing—Do  not  repair  or  replace 

any part of the appliance unless specifically 

recommended in the manuals. 

All other 

servicing should be done only by a qualified 

technician, This may reduce the risk of personal 

injury and damage to the cooktop.

• Never modify or alter the construction of a 

cooktop by removing panels, wire covers 

or any other part of the product.

•  Air curtain or other overhead hoods, which 

operate by blowing a downward air flow on 

to a range, shall not be used in conjunction 

with gas ranges other than when the hood 

Summary of Contents for E36GC76PRS



















Reviews: