Electrolux E30EW85PPS, Use And Care Manual, Page: 11 / 44

Setting Oven Controls 11
Setting the Clock Display
The clock display mode allows you to turn the clock display on
or off.
To change the clock display to OFF :
Setting 12 or 24 Hour Display
The oven control is factory preset to display the time of day in
the 12 hour clock setting. The display can be changed to a 24
hour clock setting or to the
OFF mode.
When the clock display is turned off it continues to run and will
function based on the previously set 12 or 24 hour setting.
To change clock display modes:
The clock display mode cannot be changed while the timer is
running or the oven is active with any cooking function or during
clean.
Changing Oven Temperature Display (°F or °C)
The oven control is factory preset to display oven temperatures
with Fahrenheit (°F) values. The control may be changed to dis-
play temperatures in Celsius (°C) if desired.
To change the temperature display mode:
Changing Between 12 Hour Energy Saving or
Continuous Bake Mode Settings
The oven control is factory preset for a 12 HR Energy Saving
mode. This setting automatically turns off any oven function
after 11 hours and 59 minutes of non-stop cooking. The control
may be set to override this feature for cooking beyond 12 hours.
To change between 12 Hour Energy Saving and continuous
bake settings
:
1. Press user pref until clock display
mode appears (See Figure 8 ).
2. Use
hi +
or
lo
-
on either side of the
zero ( 0 ) on the numeric keypad to tog-
gle to the CLO off option.
3. Press
START
to accept.
4. Press
CANCEL
to return to the
programming mode.
Figure 8: Clock on (L) or off (R) display
1. Press user pref until the preset 12hr
clock display mode appears. See
Figure 9 (L) below.
2. Use
hi +
or
lo -
on either side of the
zero ( 0 ) on the numeric keypad to tog-
gle to the 24hr option.
3. Press START to accept.
4. Press CANCEL to return to the
programming mode.
Figure 9: Clock 12 hour (L) or 24 hour (R) display
1. Press user pref until F or C appears in
display. Use hi + or lo - keys on either
side of the zero ( 0 ) on the numeric
keypad to select desired setting.
2. When the desired mode appears in the display release
the key.
3. Press START to accept.
4. Press CANCEL to return to the
programming mode.
1. Press user pref until either ES on or
ES off appears in the display.
2. Press
hi +
or
lo -
on either side of the zero ( 0 ) on the
numeric keypad to change between ES on and ES off .
3. When the desired setting appears press START to
accept.