9
Door Reversal
Reversing the Door
This model comes equipped with a RH-swing door.
To convert the unit to a LH-swing door (as shown
in the Use & Care Guide), certain components
must be obtained before beginning the conversion.
These components are available from your local
dealer or by calling Electrolux.
Order Part Number: 5303918377
To reverse the door:
1
Disconnect power to the wine cooler.
2
Remove toe grille by removing two (2)
screws.
3
Disconnect door harness from connector
bracket behind lower front panel. Pull
harness from behind lower front panel so it is
hanging below the door.
4
Remove upper right-hand (RH) hinge bracket
by loosening four (4) screws. Be careful
to support the door while loosening and
removing the upper hinge bracket.
5
Lift the door off of the lower RH hinge
bracket. Turn the door upside down and
place on a soft, non-abrasive surface.
