10
www.electrolux.co.th
2.2 Product Features
Auto sensing water level
Auto sensing is a feature where the
washer fills automatically with water to
just the right level for your clothes load.
You do have the option to manually set
the water level if you wish.
We recommend you use the auto sensing
water level option to ensure there is just
the right amount of water for the wash
load in the machine. In other words, it will
usually give you the best wash while also
being the most efficient in terms of water
usage.
At times during a wash it may appear
your machine is either doing nothing or
intermittently it is only gently vibrating/
jiggling/agitating.
This is because your machine could be:
• In auto sensing test mode and the
machine is determining the correct
amount of water for your wash.
• At a drain stage of the wash program
and the machine is allowing time for
water to flow the washbowl from to the
outbowl.
• Engaging or disengaging the drive
clutch mechanism. Wait a short time,
your washing machine will complete
the above tasks and continue with the
wash.
The amount of water for auto is factory
set at an optimised level. You can adjust
the Auto level up or down by a small
amount.
Power Failure Recovery
When there is power failure while the machine
is washing or rinsing or spinning. The machine
tries to save the settings at which stage the
machine is doing and then when the power
returns back the machine will start washing
from the stage where it is left off.
UltraMix
This feature helps to dissolve and activate the
active ingredients of the detergent, by blending
the detergent with the water (except Quick 20
program), before dispensing into the tub and
onto the clothes.
Dual Jets System
Dual jets help to improve cleaning results by
spraying directly on the clothes and give a
more thorough rinse-out of stains and dirt.
Summary of Contents for DV430FHM-NN1
Page 78: ...78 www electrolux co th NOTE บันทั ก ...
Page 79: ...ภาษาไทย 79 NOTE บันทั ก ...
