manualshive.com logo in svg

Electrolux dishlex DX303, User Manual

Share
Download
Electrolux dishlex DX303 User Manual Download Page 27

something not working 

electrolux  

27

If after all these checks, the problem
persists, contact your local Customer
Care Centre.

The wash results are not satisfactory

The dishes are not clean

●

The wrong washing programme has been selected.

●

The dishes are arranged in such a way as to stop water
reaching all parts of the surface. The baskets must not
be overloaded.

●

The spray arms do not rotate freely due to incorrect
arrangement of the load.

●

The filters in the base of the washing compartment are
dirty or incorrectly positioned.

●

Too little or no detergent has been used.

●

The drain hose connection is not correct.

The dishes are wet and
dull

●

Rinse aid was not used.

●

The rinse aid dispenser is empty.

There are streaks, milky
spots or a bluish coating
on glasses and dishes

●

Decrease rinse aid dosing.

Water drops have dried
onto glasses and dishes

●

Increase rinse aid dosing.

●

The detergent may be the cause. Contact the detergent
manufacturer’s consumer care line.

117994350.qxp  12/20/2006  5:46 PM  Page 27

Summary of Contents for dishlex DX303









































Reviews:

No comments

Brands by name

Popular brands

Load more brands