EN
2
20
Mounting the hood body
• Before attaching the hood body, tighten the two screws
Vr
lo-
cated on the hood body mounting points.
• Hook the hood body onto the screws
12a
.
• Fully tighten support screws
12a
.
• Adjust screws
Vr
to level the hood body.
12a
Vr
Connections
DUCTED VERSION AIR EXHAUST SYSTEM
When installing the ducted version, connect the hood to the
chimney using either a flexible or rigid pipe ø 150 or 125mm, the
choice of which is left to the installer.
To install a ø 150
• To install the dumper
10a
.
• Fix the pipe in position using sufficient pipe clamps (not
supplied).
To install a ø 125
• To install a ø 125 mm air exhaust connection, insert the redu-
cer flange
9
on the dumper
10a
.
• To install the Adapting ring
10b
.
• Fix the pipe in position using sufficient pipe clamps (not
supplied).
• Remove any activated charcoal filters.
9
ø 150
ø 125
10b
10a
10a