www.electroluxaircomfort.com 7
7. If the BUCKET FULL light does not
extinguish, check that the fl oat is correctly
snapped in place as indicated by the
diagram.
Continuous drain operation
For continuous drainage operation, you will need
a garden hose and a drain nearby to discharge
the water
1. Unscrew the drain cap on the back side of
the unit. (fi g.1)
2. Insert the female threaded end of the hose
onto the drain connector of the unit (fi g. 2).
3. Screw the garden hose onto the threaded
portion of the connector. (fi g. 3)
4. Make sure all the connection is secure and
there are no leaks.
5. Direct the hose toward the drain, making
sure that there are no kinks that will stop the
water fl owing.
6. Place the end of the hose into the drain. (fi g.
4)
7. Select the desired humidity setting and fan
speed on the unit for continuous draining to
start.
Important!
1. Check the seal between the hose and the
drain connector. If there is a small leak then
replace the hose gasket and re-tighten the
hose.
2. If the mode of continuous drainage is not
chosen, the drain cap must be screwed
securely to prevent leakage.
