21
MULTIPOINT core probe with 6 sensors along the
entire stem, for correctly measuring the product core
temperature even if the tip is not completely in the
centre.
Adjustable PROBE for data transmission on USB
pendrive.
3.
Touch
button to start the cycle.
Wait until the display indicates that the preheating (or
precooling) phase is finished.
4.
Open the door, insert the food into the cavity;
WARNING
Risk of burns. Always open
the door with caution when
the oven is hot.
5.
Remove the core probe from its seat and insert it in the
product without forcing excessively;
Make sure the tip (the sensitive part) is positioned near
the centre of the product.
It is important to place the core probe correctly near the
centre of the product, making sure the tip does not
protrude and, in particular, that it does not to touch the
pan.
IMPORTANT
The core probe is a precision component. Abso-
lutely avoid impacts, forcing when inserting, and
pulling of the flexible cable (in particular when using
the trolley-mounted structures).
The warranty does not cover the replacement of
core probes damaged by improper use.
6.
Close the oven door.
The PROBE cycle keeps running.
End Probe cycle
• When the required product core temperature is reached the
oven stops automatically. The display shows the duration of
cooking cycle;
Probe cycle deactivation
• To deactivate the PROBE cycle just press the TIME button
and set a cooking time. This action automatically cuts
out the core probe and viceversa.
When the oven is switched off the core probe option is also
deactivated.
NOTE!
With vacuum packed food products it is necessary
to use the special external core probe (accessory
available on request), to be connected to the USB
pendrive. For its use, see the instructions included
with the accessory.
MULTITIMER OPTION
MultiTimer system allows to set a different time for each recipe
(chicken, potatoes, etc.) or for each pan placed on the various
levels (level 1 for the top pan, next levels for lower pans).
This function also allows the oven to be used with "à la carte"
menu, where the food can be placed in the oven at the required
time during the same cycle.
NOTE!
This function cannot be selected in a multiphase
cycle.
Setting a MultiTimer option
1. While setting a manual program, select MultiTimer option
and confirm;
2. A pop-up window opens. Touch the left part of a row to
create a new preset, type the new name on the keypad
and confirm.
3. Set preset duration or food core temperature. There are
two ways to do it:
1
1
4
7
5
8
6
1 2 3
0
9
m:s
MANUAL
4
7
5
8
6
1 2 3
0
9
MANUAL
1
MultiTimer
MANUAL
1
2
3
5
6
7
10
8
9
4
MultiTimer
--:--h:m
--:--h:m
--:--h:m
--:--h:m
--:--h:m
--:--h:m
--:--h:m
--:--h:m
--:--h:m
----
----
----
----
----
----
----
----
----
--:--h:m
----
Z
A
Q W E R T Y U I O P
1 2 3 4 5 6 7 8 9 0
S D F G
Space
H J K L
X C V B N M
#+,
Preset 1
PRESET NAME
1
2
3
