6
Hob dimensions
length
572 mm
width
502 mm
height
43 mm
Cutout dimensions
length
560 mm
width
490 mm
radius
55 mm
Voltage
230/400 V ~ 50 Hz
Total power
6.9 kW
Cooking zones
The cooking zones are clearly mar-
ked on the ceramic surface. Only
the cooking zone which is switched
on will be heated up. The remaining
surface will not get hot.
Control panel
The hob CC 3065 can be combined with the control
panel CP 218.
Heat control knobs
The control knobs enable the regulation from 1-10 of the
heating capacity. The control knobs for the one-circuit
(as well as for the inner circle of the two-circuit cooking
zone) can be turned to the left and to the right. Setting
it back to "0" turns off the cooking zone.
Double circuit cooking zone
If the second circle of the two-circuit cooking zones
(No.2 and 3) is needed, the control knob concerned has
to be turned over position "10" to the final stop from
where it automatically springs back to position "10".
The temperature can now be controlled by turning back
the knob in the opposite direction to the wanted position.
Setting it back to "0" turns off the cooking zone.
Typ 072.2
CC 3065
Prod.No. 941 592 670
Instr. No.
Ser.No.
6.9 kW
230 V ~ 50 Hz
SWISS MADE
Typ 071.2
CC 3065
Prod.No. 941 592 671
Instr. No.
Ser.No.
6.9 kW
400 V ~ 50 Hz
SWISS MADE
Rating
plates
TECHNICAL DATA
OPERATING
INSTRUCTIONS
