background image

3

SAFETY

Please read the user manuals carefully and store in a 

handy place for later reference. 

WARNING

 IMPORTANT

Important – check for any damages or marks 
If you find the barbecue is damaged or marked, you must 

report it within 7 days if you wish to claim for damage/

marks under the manufacturer’s warranty. This does not 

affect your statutory rights.

ENVIRONMENTAL TIPS

 ENVIRONMENT

Information on disposal for users
•     Most of the packing materials are recyclable.  

Please dispose of those materials through your local 

recycling depot or by placing them in appropriate 

collection containers.

•   If you wish to discard this product, please contact    

your local authorities and ask for the correct method  

of disposal.

WARNING

WARNING

This appliance must be serviced only by a qualified 

licensed person.
Improper installation, adjustment, alteration or 

maintenance can cause injury or property damage and 

may affect your ability to claim under the manufacturer’s 

warranty.
Please contact your nearest BeefEater Service Department 

for additional information or assistance from an approved 

installer.

Notes to the installer
•  After the barbecue is removed from the packaging take 

care to protect the gas hose connection from damage.

•  Wear gloves when assembling the barbecue to protect your 

hands from cuts

•  This manual must remain with the owner for future 

reference.

WARNING

WARNING

•     Do not lean over barbecue when lighting.
•     Do not leave the barbecue unattended when alight.
•     Do not delay lighting once the gas has been turned on.
•     Do not store or use aerosol cans in the vicinity of  

the barbecue.

•     Do not store or use flammable liquids or flammable 

materials in the vicinity of this barbecue.

•     Do not use caustic or abrasive based cleaners on  

the barbecue.

•     Do not attempt to dismantle or adjust the control 

valves.

•     Do not attempt to dismantle or adjust the regulator.
•     Do not test for leaks with a naked flame.
•     Do not modify the construction of this appliance or 

modify the injector orifice size.

•    Do not place articles on or against this appliance
•     Do not obstruct any ventilation of the barbecue.
•     Do not allow children to operate or play near  

the barbecue.

Failure to adhere to the above warnings may cause injury 

or property damage and affect your ability to make a claim 

under the manufacturer’s warranty.

WARNING

CAUTION

This appliance is set up for LPG gas and is labelled 

accordingly. A natural gas conversion kit is available as  

an accessory if required. Conversion of this unit to natural 

gas must be carried out by a qualified licensed person and  

a Certificate of Compliance must be issued to the owner  

at the completion of the installation and conversion.

WARNING

 IMPORTANT

BeefEater Barbecues are approved for OUTDOOR USE ONLY 

and must not be used in a building, garage or any other 

enclosed area.
•     BeefEater Barbecues must not be used inside 

recreational vehicles or boats.

•     Read instructions thoroughly before operating this 

Barbecue.

•     Save this manual for future reference.
•     Always use the Barbecue on a flat, level surface.
•     Some foods produce flammable fats and juices.  

Regular cleaning is essential.

•     Attend an operating barbecue at all times. Damage 

caused by fat & grease fires is not covered by warranty.

•     When not in use keep Barbecue dry and covered.

WARNING

WARNING

If you smell gas:
1.     Shut off gas to the appliance.
2.     Extinguish any open flame.
3.      Open  hood.
4.     If odour continues, immediately call your gas supplier 

or your fire department.

For your safety
1.     Do not store or use gasoline or other flammable 

vapours or liquids in the vicinity of this or any  

other appliance.

2.     An LPG cylinder not connected for use shall not be 

stored in the vicinity of this or any other appliance.

IMPORTANT SAFETY INSTRUCTIONS

Summary of Contents for Beef Eater 1600 Series





























Reviews: