68
Your appliance needs air
For safety reasons, minimum
ventilationmust be as shown Fig.
Attention: keep ventilation
openings clear of obstruction;
100 mm
10 mm
10 mm
A
B
NP007
Rehingeing the door
The side at which the door opens can be changed from the right side
(factory adjustment) to the left side, if the installation site requires.
Warning!
When changing the side at which the door opens, the appliance
may not be connected to the mains. Remove plug from the mains
beforehand.
Procced as follows:
To carry out the following
operations, we suggest that this be
made with another person that will
keep a firm hold on the door of the
appliance during the operations.
Gently lay the appliance on its
back.
1.
Remove the ventilation grille.
2.
Remove the bottom hinge (A) by
unscrewing the fixing screws.
3.
Remove the door.
4.
Unscrew the pin of the bottom
hinge (f) and refit it on the
opposite side.
Rear spacers
In the bag with the documentation,
there are two spacers which must be
fitted.
Slacken the screws and insert the
spacer under the screw head, then
re-tighten the screws.
PR153
