Electrolux A15931301, Use & Care Manual

Page: 7 / 20

7
Wash Cycles
Controls and Settings
Wash Options
Wash cycle selections
Cycle times are approximate and will
vary with the options selected. Hot water
is necessary to activate the detergent
and melt fatty food soils. An automatic
sensor will check the incoming water
temperature. If it is not at the appropriate
temperature the timer will delay the cycle
to allow automatic water heating during
the main wash. When the HI TEMP wash
is selected an even higher temperature will
be assured to handle heavier soil loads.
Wash cycles
AUTO
Auto Cycle uses sensors in the dish
washer to determine the soil level of the
dish load, then adjusts the wash cycle to
optimiz e the wash performance, water
and energy usage.
HEAVY
Recommended for pots, pans, casseroles
and dinnerware having heavily soiled loads.
NORMAL
Recommended for lightly to heavily soiled
loads.
FAST
A shorter wash recommended for lightly
soiled loads.
RINSE
Recommended for pre-rinsing dishes or
glasses. This is only a rinse that keeps
food from drying on your dishes and
reduces odor buildup in your dishwasher
until you are ready to wash a full load. Do
not use detergent.
Wash options
HI TEMP
When HI TEMP is selected, the
temperature of the water will be maintained
at 140°F (60°C) max.
SANITIZE
When SANITIZE is selected, the
temperature of water will be maintained at
156.2°F (69°C) max. The max temperature
may not be reached if the incoming water
temperature is not correct. Certified
residential dishwashers are not intended
for licensed food establishments.
WARNING
The SANITIZE option is only available with
HEAVY and NORMAL wash cycles.
HEAT DRY
When HEAT DRY is selected, the heater
will work during the drying process.
Functions
START
Press START and close door within
4 seconds to start a wash cycle.
CANCEL
Press CANCEL to cancel a cycle that is
already in progress.
DELAY
The DELAY option allows you to
automatically delay starting your
dishwasher from 1-24 hours. To start
1-24 hour delay, press the DELAY button
until the desired delay time shows in
the display window (1h-24h) and press
the START button. A light will come
on indicating the delay start has been
activated and will remain on until the cycle
starts. To cancel the delay option and
begin the cycle before the delay period is
over, press the CANCEL button.
Control lock
Use to lock all controls and prevent
children from accidently changing
the dishwasher cycle or starting the
dishwasher. Press and hold
HEAT DRY
for 3 seconds to lock. After the function is
selected the control lock illuminate. Press
and hold again for 3 seconds to unlock.
Functions Cycle Indicator