background image

Clean the condenser (black grill) and the compressor at the back of the appliance with a

brush or a vacuum cleaner. This operation will improve the performance of the appliance

and save electricity consumption.
Take care of not to damage the cooling system.

Many proprietary kitchen surface cleaners contain chemicals that can attack/damage the

plastics used in this appliance. For this reason it is recommended that the outer casing of

this appliance is only cleaned with warm water with a little washing-up liquid added.

After cleaning, reconnect the equipment to the mains supply.

Defrosting of the freezer

The freezer compartment of this model, on the other hand, is a "no frost" type. This means

that there is no buildup of frost when it is in operation, neither on the internal walls nor

on the foods.

The absence of frost is due to the continuous circulation of cold air inside the compartment,

driven by an automatically controlled fan.

Periods of non-operation

When the appliance is not in use for long periods, take the following precautions:

disconnect the appliance from electricity supply

• remove all food

• defrost 

4)

and clean the appliance and all accessories

• leave the door/doors ajar to prevent unpleasant smells.

If the cabinet will be kept on, ask somebody to check it once in a while to prevent the food

inside from spoiling in case of a power failure.

What to do if…

WARNING!

Before troubleshooting, disconnect the mains plug from the mains socket.

Only a qualified electrician or competent person must do the troubleshooting that is not

in this manual.

There are some sounds during normal use (compressor, refrigerant circulation).

Problem

Possible cause

Solution

The appliance does not

operate. The Pilot light

does not flash.

The appliance is switched off.

Switch on the appliance.

 

The mains plug is not connected

to the mains socket correctly.

Connect the mains plug to the

mains socket correctly.

 

The appliance has no power.

There is no voltage in the mains

socket.

Connect a different electrical ap

-

pliance to the mains socket.

Contact a qualified electrician.

4) If foreseen.

10

What to do if…

Summary of Contents for A 75279-4 GA

















Reviews: