Electrolux 96699IH, User Manual

Page: 18 / 36

THE DELAY START FUNCTION
Let to delay the start of a drying
programme from minimum of
30 minutes to maximum of 20
hours.
1. Set the drying programme and
functions.
2.
Push the Delay start button again
and again until the necessary time
of the delay come into the view on
the display (e.g. if the pro-
gramme has to start after 12 hours.)
3. To activate the Delay start function,
push the Start/Pause button. The
time to start decreases on the dis-
play.
THE EXTRA SILENT
FUNCTION
This function use special procedure to
dry the laundry and decreases the noise
to the minimum.
CHILD LOCK FUNCTION
The child lock can be set to prevent the
children to play with the appliance. The
child lock function locks all functions
and the programme dial (this function
does not lock
On/Off button). To ac-
tivate the child lock function touch the
Dry Plus and Anticrease function surfa-
ces at the same time. When the func-
tion is active the symbol
comes into
view on the display.
S e n s i D r y
Memory 1
Memory 2
Extra Silent
Start/Pause
Delay
Start
Time Dry Buzzer
Spun at
RPM
Dry Plus Anti-
crease
To deactivate touch again the above
function surfaces until the symbol go
out of view.
You can activate the child lock function:
• before you touch the Start/Pause
function - the appliance cannot start
• after you touch the Start/Pause func-
tion - all the push buttons and the
programme dial are deactivated
USER SELECTION MEMORY
1-2
Each programme set initially can be
memorised in the appliance memory
and used after. You can do your config-
uration and than memorise in the appli-
ance memory under 2 positions: Mem-
ory 1 and Memory 2.
To memorise your configuration:
1. Set the programme and available
functions
2. Touch the Memory 1 or 2 for some
seconds. The sound and the mes-
sage on the display confirm that
the configuration is memorised.
S e n s i D r y
Memory 1
Memory 2
Extra Silent
Start/Pause
Delay
Start
Time Dry
Buzzer
Spun at
RPM
Dry Plus
Anti-
crease
To activate your memorised configura-
tion:
1. Activate the appliance
2. Do the selection of the Memory 1
or 2
STARTING A PROGRAMME
S e n s i D r y
Memory 1
Memory 2
Extra Silent
Start/Pause
Delay
Start
Time Dry Buzzer
Spun at
RPM
Dry Plus
Anti-
crease
To activate the programme touch the
Start/Pause function surface as on the
illustration. The LED above starts to illu-
minate permanently in red colour.
CHANGE A PROGRAMME
To change a programme, push the
On/Off button to deactivate appliance.
Push the On/Off to activate the ap-
18