Electrolux 95GX Operating And Safety Instructions Manual Download Page 12

OPERATING INSTRUCTIONS

Page 10

62.9696.01

Note:
The manual force on the knob should not exceed 25 kg.

Safety information

When the lid is opened, it should be noted that hot vapors may

flow out or hot fat may splash out. Staff must take this into

account by means of appropriate measures (standing far

away, holding lid by knob) in order to avoid injuries.
After cooking with the lid closed, either pressureless or under

pressure, the lid must not be opened until the pressure has

been completely released from the appliance. Particular care

is required if the food froths. If the lid is opened when there is a

small residual positive pressure, hot food may flow out and

injure the operator.

6.

ADDITIONAL EQUIPMENT

Perforated base plate (

Fig. 9A

)

Baskets and other inserts can be placed on the base plate.

Suspension frame GN1/1 (

Fig. 9B

)

Support of perforated and not perforated trays GN1/1.

Trays GN1/1

Perforated and not perforated trays GN1/1.

7.

WORKING RULES

7.1

Filling

7.1.1

Pressureless cooking

Throughout the complete cooking process the level of the liq-

uid food may never rise above 1.6“ (4 cm) below the pan edge.

During operation, the lid must be closed, but not locked.
For the "Cook" function (temperature setting up to 212°F

(100°C)) to operate correctly, the pan must be filled with food

to a depth of at least 1.5“ (3 - 4 cm) to prevent the food from

being burnt. The SOFT function should be activated if the pan

is filled with less food.

7.1.2

Pressure cooking

Depending on the type of liquid food, i.e. smaller or greater

tendency to froth and boil over, the pan must be only half filled

to allow sufficient steam to remain above the food.

7.1.3

Pressure steaming

When inserted containers are used, water is poured in only to

below the bottom grid, i.e. level about 1“ (2 cm).

Safety information

S

During pressureless cooking the filling of the appliance

must never rise above 1.6“ (4 cm) below the boiler rim.

Depending on the type of food to be cooked, filling must be

less so as to prevent bubbling over.

S

During pressure cooking the pan must be only half or less

filled.

7.2

Use as pan:

When laying meats to be fried on the pan bottom, the sensitive

regulation must be watched.The temperature of the pan bot-

tom will stay equally the same, that is when laid in the middle

of the pan. To begin it is necessary that placing takes place

partially in the middle.

Sticky food

To prevent the food from sticking to the bottom of the pan, the

following procedure can be applied:
Mix about 2 kg of unpeeled, uncleaned slices of potatoes with

about 2 kg of salt and spread out this mixture on the empty

cold bottom of the pan. Afterwards, heat up the pan gradually

to the maximum heat during one hour. Then let it slowly cool,

without quenching it with water.

7.3

Use as cooking appliance, pressureless or with 

pressure

Cooking times

The total cooking time for a food is composed of three phases.

A Base plate

B Suspension frame GN 1/1

C Trays

 Fig. 9

Accessories

Cooking 

process

Food

Temperature Comments

Sauteing, 
brief roasting

Escalope, steaks, 
diced meat, shred-
ded meat

374°F (190°C)

Cover opened

Roasting

Pieces of meat

initially 391°F 
(200,°C)
then 230-320°F (110-
160°C)

Cover opened

Stewing, braising

White meat, poultry

initial roasting 392°F 
(200°C)
glazing 392°F 
(200°C)

Cover opened

Cover closed

Steaming, glazing

Vegetables

284-320°F (140-
160°C)

Cover closed

Poaching, 
light browning

Poultry

initially (284-320°F 
(140-160°C)
then 176°F (80°C)

Cover closed

Cooking 

process

Food

Temperature Remark

pressure-

less

with 

pressure

Cooking

Meat, Vegetables, 
Potatoes, Rice, 
Sauces, Noodles, 
Clear broth

212°F
(100°C)

225°F
(107°C)

with or without inserted 
containers, suspension 
frames and bottom grid

Steaming

Meat, Vegetables, 
Fish, Eggs, Fruit

212°F
(100°C)

225°F
(107°C)

with or without inserted 
containers, suspension 
frames and bottom grid

Thawing of 
frozen food

Vegetables, Rice, 
Meat, Fruit

212°F
(100°C)

225°F
(107°C)

with or without inserted 
containers, suspension 
frames and bottom grid

Summary of Contents for 95GX

















Reviews: