background image

16

III.  GENERAL INSTRUCTIONS

•  Read the instruction manual carefully before using the appliance.

•  Keep the instruction manual for future reference..

• RISK OF FIRE - Keep the area around the appliance free and clear of combustibles. Do not keep flammable 
materials in the vicinity of the appliance.

• Install the appliance in a well-ventilated place to avoid the creation of dangerous mixtures of unburnt 
gases in the room.
• Air recirculation must take into account the air necessary for combustion 2 m³/h/kW of gas power, as well 
as the well-being of persons working in the kitchen.

•  Inadequate ventilation causes asphyxia. Do not obstruct the ventilation system in the place where this appliance is 

installed. Do not obstruct the vents or ducts of this or other appliances.

• Place emergency telephone numbers in a visible position.

•  Installation, maintenance and conversion to another type of gas must only be carried out by qualified personnel authorised 

by the manufacturer. For assistance, contact an authorised technical centre. Demand original replacements parts.

•  This appliance is designed for cooking food. It is intended for industrial use. Any use different from that indicated is 

improper

.

•   This appliance is not intended for use by people (including children) with limited physical, sensory or mental abilities or without 

experience and knowledge of it, unless they are supervised or instructed in its use by a person responsible for their safety.

• Personnel using the appliance must be 

trained

. Do not leave the appliance unattended when in use.

• Turn the appliance off in case of a fault or poor operation.

• Do not use products (even if diluted) containing chlorine (sodium hypochlorite, hydrochloric or muriatic 
acid, etc.) to clean the appliance or the floor under it. Do not use metal implements to clean steel parts 
(wire brushes or Scotch Brite type scouring pads).

•  Do not allow oil or grease to come into contact with plastic parts.

•  Do not allow dirt, fat, food or other residuals to form deposits on the appliance.

 

Do not clean the appliance with direct jets of water.

•  The symbol 

L

 given on the product indicates that it should 

not

 be considered domestic waste, but must be correctly 

disposed of in order to prevent any negative consequences for the environment and the health of people. 

 

For further information regarding the recycling of this product, contact the product agent or local dealer, the after-sales service 
or the local body responsible for waste disposal.

Warnings

•  Do not store or use gasoline or other flammable vapours, liquids or items in the vicinity of this or any other appliance.
•  Do not spray aerosols in the vicinity of this appliance while it is in operation.
•   Never check for leaks with an open flame.
•  The appliance is not suitable for a marine environment.

Failure to observe the above can compromise the safety of the appliance. Failure to observe the 
above invalidates the warranty.

sos

Summary of Contents for 7GRGDGC0P











Reviews: