Electrolux Blast Freezers
Blast Chiller/ Freezers - 56 kg 20 GN1/1
Internet: http://www.electrolux.com/foodservice
HDBA030
2011-05-10
Subject to change without notice
TROLLEY FOR 20X1/1 ROLL-IN RACK
922132
922132
RILSAN COATED GRID
881061
881061
REMOVABLE TRAY SUPPORT RACK FOR 20 GN1/1
881010
881010
RACK RAILS FOR VERTICAL BLAST CHILLER
881182
881182
PRINTER FOR HACCP BASIC VERSION
881532
881532
PLASTIC COATED GRID-600X400 MM
880864
880864
PAIR OF 1/1 GN AISI 304 S/S GRIDS
921101
921101
KIT HACCP EKIS
922166
922166
KIT HACCP ADVANCED CONNECT. BC/BCF LW+CW
880183
880183
80MM PITCH ROLL-IN RACK 14X1/1GN
922205
922205
60-MM PITCH ROLL-IN RACK FOR 20X1/1
922203
922203
3-POINT-SENSOR PROBE-BL.C/FREEZERS LW
880212
880212
3 SINGLE-SENSOR PROBES-BL.C/FREEZERS LW
880215
1 SINGLE-SENSOR PROBE-BL.C/FREEZERS LW
880213
880213
ACCESSORIES
REMOVABLE TRAY SUPPORT RACK FOR 20 GN1/1
4
4
1 SINGLE-SENSOR PROBE-BL.C/FREEZERS LW
1
1
INCLUDED ACCESSORIES
Power supply - V, phases, Hz
400 V, 3N, 50
220 V, 3N, 60
Net weight - kg.
235
235
installed-electric
3.933
4.216
Power - kW
at evaporation temperature - °C
-5
-5
Refrigerant power
Refrigeration power - W
9054
4520
Refrigerant quantity - g.
3600
3600
Refrigerant type
R404a
R404a
N° defrost in 24 hrs.
3
Compressor power - HP
3
2.8
Max load capacity - trays h 65 mm - n°
12
Trays type
GN 1/1; 600x400
GN 1/1; 600x400
Door hinges
Right Side
Right Side
height
2230
2230
depth/with open doors
835, 1570
835, 1570
width
800
800
External dimensions - mm
Cooling unit
Built-In
Built-In
Gross capacity (D.I.N. 8952) - l.
560
560
UK Guide lines - chilling / freezing
64, 56
NF Regulations - chilling / freezing
43.2
Productivity per cycle - kg.
Power supply
Electric
Electric
TECHNICAL DATA
RBF201
726630
RBF2016
727133
CONSTRUCTION
•
Internal and external finishing in 304
AISI stainless steel and backpanel in
galvanized steel.
•
High density polyurethane
insulation, 60 mm tickness, HCFC
free.
•
Environmentally friendly: R404a as
refrigerant fluid.
•
Developed and produced in ISO
9001 and ISO 14001 certified factory.
•
Inner cell with fully rounded corners.
•
Door equipped with removable
magnetic gasket with hygienic design.
•
Motors and fan waterproof
protected IP21.
•
Evaporator with antirust protection.
•
Ventilator (fan) swinging hinged
panel for access to the evaporator for
cleaning.
•
Automatic heated door frame.
•
Thermostatic expansion valve to
optimize the cooling unit efficiency.
•
Adjustable feet 150 mm high.
•
Stand alone printer as accessory.
•
PC connection on request, gate RS
485.
INSTALLATION
•
No water connections required.
•
Waste water can be plumbed into
drain, but can also be collected in an
optional waste container.
