12
Cooking with the Automat-
ic Warm up Function
All four of the hob's cooking zones can be controlled
in nine stages and have an automatic warm up func-
tion:
–
1
, lowest heat setting
–
9
, highest heat setting
–
a
, automatic warm up function
When you select the required heat setting using the
+
sensor field, the cooking zone will work for a spe-
cific time on full power and then switch automatically
to the set heat setting.
The duration of the automatic warm up function de-
pends on the heat setting selected.
Select the required cooking zone with the cooking
zone sensor fields.
Touch sensor field
+
until it reaches the required
heat
1
to
8
. The set heat setting will be displayed
first. After five seconds
a
(= automatic warm up
function) will replace the heat setting in the display.
At the end of the warm up time the heat setting will
be shown again.
3
If during the automatic warm up function you
select a higher setting, eg. from
3
to
5
, the
warm up time is adjusted to match. If you se-
lect a lower setting, the warm up time ends at
once.
2
If you start cooking again on a cooking zone
that is still warm, the automatic warm up func-
tion uses the residual heat. This saves time
and energy.
3
If you again wish to switch on a cooking zone
on which hot items are already standing, you
should always select the required heat setting
with the
-
sensor field. In this way you can
avoid making the food boil over as a result of
the extra burst of heat from the automatic
warm up.
