background image

9

Cleaning and Mainteinance

Disconnect the appliance from the
electrical supply, before carrying out
any cleaning or manteinance work.
The hob is best cleaned whilst it is
still warm, as spillage can be
removed more easily than if it is left
to cool.
This appliance cannot be cleaned
with steam or with a steam cleaning
machine.

The burners

z

The burner caps and crowns can be
removed for cleaning.

z

Wash the burners taps and crowns using
hot soapy water, and remove marks with
a mild paste cleaner. A well moistened
soap impregnated steel wool pad can be
used with caution, if the marks are
particularly difficult to remove.

z

After cleaning, be sure to wipe dry with a
soft cloth.

z

Frequently wash the "caps" and the
"crowns" with hot soapy water, carefully
taking away any built-up of food.

The pan supports

z

After cleaning, make sure that the pan
supports are correctly positioned.

z

To make burners work properly, ensure
that pan supports are placed in a way
that the arms are centred upon the
burner as shown in the picture.

z

Pay attention when replacing the pan
supports in order to avoid damaging
the hob top.

Hobs with cast iron pan supports:
after cleaning, place the pan
supports back on their position. In
order to carry out this operation
correctly, place the side pan
supports before the central one.

NO

YES

Summary of Contents for 65557 G-M






















Reviews: