background image

Approval: ___________________________________________

534094 

(WT66CL208)

66

 Conveyor Dishwasher without

Built in Booster. Left to Right - 208V

534095

 (WT66CR208)

66

 Conveyor Dishwasher without

Built in Booster. Right to Left - 208V

534096 

(WT66CL240)

66

 Conveyor Dishwasher without

Built in Booster. Left to Right - 240V

534097

 (WT66CR240)

66

 Conveyor Dishwasher without

Built in Booster. Right to Left - 240V

Item No. ___________________________________

Unit to be Electrolux WT66 Hot Water Sanitizing 66

 single tank

conveyor dishwasher without built in hot water booster. Electrical
characteristics to be ____ 208 V or ____ 240 V three phase operation.
Unit to operate from ___ left to right or ____ right to left. Unit to feature
built in rinse booster pump thus guaranteeing rinse pressure during rinse
cycle. Unit to include 22

 pre wash zone. Pre

-

wash zone with powerful

0.5 HP cold water pre wash. Unit to have two conveyor speeds which can
be selected from the control panel by the operator, 130 racks/hour or
200 racks/hour. Maximum water consumption at 200 racks/hour of  only
83 gal/hour (0.4 gal/rack). Unit to feature large heat and noise insulated
front counter balanced door in pre

-

wash and wash/rinse sections for

easy access of internal components. Powerful 2 HP wash pump and
specially designed wash spray arms to guarantee cleaning. Unit to
feature as standard end of day self cleaning cycle. Drain of water from
the machine can be done through the control panel. Large deep drawn
26 gal wash tank for extended wash sessions.

Covered by Electrolux Platinum 

Star®

 Service Program two-year parts

and one-year labor warranty, installation start-up and performance check-
up after one year from installation.

Short Form Specification

Electrolux Professional, Inc.

www.electroluxusa.com/professional

3225 SW 42nd Street, Fort Lauderdale, Florida, 33312 • Telephone Number: 866-449-4200 • Fax Number: 954-327-6789

ITEM # _______________________________________________

MODEL # _____________________________________________

PROJECT NAME # ______________________________________

SIS # _________________________________________________

AIA # _________________________________________________

Warewashing

66

 Single Tank Conveyor Dishwasher

  

w/o 

B

uilt 

I

H

ot 

W

ater 

B

ooster WT66

Main features

Built in rinse booster pump guarantees constant rinse pressure.

Speed of conveyor can be set through the control panel by the
operator. 130 racks/hr or 200 racks/hr.

Large counter balanced inspection doors in pre wash and wash/
rinse sections allow unrestricted all round access to the wash and
rinse area. Door is insulated with injected foam. This adds strength
as well as reduces noise and heat loss.

Large filters sloping towards the front to the smaller pressed filter box for
quick removal. Filters feature holes smaller than the concave ant-block
wash nozzles so large food cannot enter and block the wash system.
Filters easy to remove from pre wash as well as wash/rinse sections.

Adjustable feet for full access underneath the machine for cleaning.

Push button self cleaning cycle of the wash and rinse zones for ease
of “end of day” cleaning.

Wash chamber without internal pipes and therefore no hidden dirt traps.

Pre wash chamber without internal pipes and therefore no hidden
dirt traps.

Self draining wash pumps provide maximum hygiene with no smells and
all wash and rinse zones drain automatically at the push of a button.

Powerful 0.5 H

P

 pre

-

wash pump.

Powerful 2 H

P

 wash pump.

Heavy duty 

s

tainless steel wash pump (impeller and housing).

Pre wash section uses cold water so food remains are not “baked”
onto the plates.

Deep drawn pressed 26 gal wash tank with fully rounded corners,
sloped towards the drain to prevent dirt build up provides fast
drainage in only a few minutes. Pressed wash tank with no welded
points offer a guaranteed water tight solution.

Deep drawn pressed 11.8 gal pre wash tank with fully rounded corners.

Dishwasher structure is held together with a solid 2

 × 2

 

s

tainless

steel tube sub-frame to provide long term sturdiness.

All main components made in heavy duty anti-corrosive 304 type

s

tainless steel: tanks, panels, pre wash, wash & rinse arms and

caps, doors, front, handle, rear and side-panels and rack

transpor

tation system.

Pre wash, wash and rinse arms can be easily removed for cleaning.

IPX5 (NEMA4) water protection ensures no damage from cleaning.

Autostart/stop ensures that the machine runs only when a rack is passing
through it. This reduces both water and energy consumption.

Internal curtains made of silastic material and are not affected by
detergent or heat.

Electronic control panel features large display for reading of wash
and rinse temperatures.

Low water consumption. At 200 racks per hour, the machine uses
only 83 gal/hr (0.4 gal/rack).

Machine predisposed for external detergent and rinse aid connections.

Included Accessories

Vent cowls (left and right side)

.

One open sided dishwasher rack for trays

.

Rack for cups.

Rack for dinner plates.

Optional Accessories

Ventilation activation kit

.

Drain water tempering kit

.

   

W
a

r

ewashing

66

 Single T

ank Conveyor Dishwasher without 

B

uilt 

I

H

ot 

W

ater 

B

ooster

WT66

Warewashing
66

 Single Tank Conveyor Dishwasher

without 

B

uilt 

I

H

ot 

W

ater 

B

ooster WT66

3048424

Summary of Contents for 534094

Page 1: ...ons allow unrestricted all round access to the wash and rinse area Door is insulated with injected foam This adds strength as well as reduces noise and heat loss Large filters sloping towards the front to the smaller pressed filter box for quick removal Filters feature holes smaller than the concave ant block wash nozzles so large food cannot enter and block the wash system Filters easy to remove ...

Page 2: ...r requirements 26 gal 100 liters Initial fill Cold Water requirements 11 8 gal 45 liters Supply voltage 534094 WT66CL208 208 V 3p 60Hz 534095 WT66CR208 208 V 3p 60Hz 534096 WT66CL240 240 V 3p 60Hz 534097 WT66CR240 240 V 3p 60Hz Machine requires one electrical connection Max Current absorbed 208 V 3p 60Hz 64A 21 kW 240 V 3p 60Hz 57 5A 21 kW Exhaust Requirements Unit supplied as standard with extend...

Page 3: ... mm Min 15 75 204 mm 8 06 102 mm 4 00 177 mm 7 00 566 mm 22 25 623 mm 24 50 698 mm 27 50 200 mm 7 88 1037 mm 40 81 562 mm 22 13 578 mm 22 75 205 mm 8 06 D DE DE1 Water drain Detergent Dispenser Connection Detergent Probe EC1 EC2 CW Electrical connection 1 Electrical connection 2 Cold Water Inlet DE1 174 mm 6 81 562 mm 22 13 60 mm 2 38 50 mm 1 94 116 mm 4 56 209 mm 8 19 406 mm 16 00 592 mm 23 31 87...

Page 4: ...OWN PORTION OF TABLE 21 25 1 75 1 75 AWG 20 75 527 mm INSIDE TANK 21 00 533 mm OPENING 1 75 45 mm 2 25 57 mm AWG 8 00 203 mm 1 50 38 mm 8 25 210 mm 1 50 38 mm 0 63 16 mm TRACK AND TABLE MUST BE AT SAME LEVEL USE SEALANT BETWEEN TABLE AND LIP OF TANK TO PREVENT WATER LEAKAGE SECTIONAL VIEW SHOWING TABLE CONNECTIONS 27 75 705 mm 21 25 540 mm 10 63 270 mm 8 25 210 mm 0 25 7 mm CENTER LINE MACHINE AVG...

Reviews: