Electrolux 534074 Specification Sheet Download Page 1

Approval: ___________________________________________

534074 

(WT44CL208)

44

 Conveyor Dishwasher without

Built in Booster. Left to Right - 208V

534075 

(WT44CR208)

44

 Conveyor Dishwasher without

Built in Booster. Right to Left - 208V

534076 

(WT44CL240)

44

 Conveyor Dishwasher without

Built in Booster. Left to Right - 240V

534077 

(WT44CR240)

44

 Conveyor Dishwasher without

Built in Booster. Right to Left - 240V

Item No. ___________________________________

Unit to be Electrolux WT44 Hot Water Sanitizing 44

 conveyor dish-

washer without built in hot water booster. Electrical characteristics to be
____ 208 V or ____ 240 V three phase operation. Unit to operate from
___ left to right or ____ right to left. Unit to feature built in rinse booster
pump thus guaranteeing rinse pressure during rinse cycle. Unit to have
two conveyor speeds which can be selected from the control panel by
the operator, 130 racks/hour or a maximum 200 racks/hour. Maximum
water consumption at 200 racks/hour of  only 79 gal/hour (0.4 gal/rack).
Unit to feature large heat and noise insulated front counter balanced
door for easy access of internal components. Powerful 2 HP wash pump
and specially designed wash spray arms guaranteed cleaning. Unit to
feature as standard end of day self cleaning cycle. Drain of water from
the machine can be done through the control panel. Large deep drawn
26 gal wash tank.

Covered by Electrolux Platinum 

Star®

 Service Program two-year parts

and one-year labor warranty, installation start-up and performance check-
up after one year from installation.

Short Form Specification

Electrolux Professional, Inc.

www.electroluxusa.com/professional

3225 SW 42nd Street, Fort Lauderdale, Florida, 33312 • Telephone Number: 866-449-4200 • Fax Number: 954-327-6789

ITEM # _______________________________________________

MODEL # _____________________________________________

PROJECT NAME # ______________________________________

SIS # _________________________________________________

AIA # _________________________________________________

Warewashing

44

 Single Tank Conveyor Dishwasher

w/o 

B

uilt 

I

H

ot 

W

ater 

B

ooster WT44

Main features

• Built in rinse booster pump guarantees constant rinse pressure.

• Speed of conveyor can be set through the control panel by the

operator. 130 racks/hr or 200 racks/hr.

• Large counter balanced inspection doors allow unrestricted all

round access to the wash and rinse area. Door is insulated with
injected foam. This adds strength as well as reduces noise and heat
loss.

• Large filters sloping towards the front to the smaller pressed filter

box for quick removal. Filters feature holes smaller than the concave
ant-block wash nozzles so large food cannot enter and block the
wash system.

• Adjustable feet for full access underneath the machine for cleaning.

• Push button self cleaning cycle of the wash and rinse zones for ease

of “end of day” cleaning.

• Wash chamber without internal pipes and therefore no hidden dirt

traps.

• Self draining wash pumps provide maximum hygiene with no smells

and all wash and rinse zones drain automatically at the push of a
button.

• Powerful 2 H

P

 wash pump.

• Heavy duty 

s

tainless steel wash pump (impeller and housing).

• Deep drawn pressed 26 gal wash tank with fully rounded corners,

sloped towards the drain to prevent dirt build up provides fast
drainage in only a few minutes. Pressed wash tank with no welded
points offer a guaranteed water tight solution.

• Dishwasher structure is held together with a solid 2

 × 2

 

s

tainless

steel tube sub-frame to provide long term sturdiness.

• All main components made in heavy duty anti-corrosive 304 type

s

tainless steel: tanks, panels, wash & rinse arms and caps, doors,

front, handle, rear and side-panels and rack transportation system.

• Wash and rinse arms can be easily removed for cleaning.

• IPX5 (NEMA4) water protection ensures no damage from cleaning.

• Autostart/stop ensures that the machine runs only when a rack is

passing through it. This reduces both water and energy
consumption.

• Internal curtains made of silastic material and are not affected by

detergent or heat.

• Electronic control panel features large display for reading of wash

and rinse temperatures.

• Low water consumption. At 200 racks per hour, the machine uses

only 79 gal/hr (0.4 gal/rack).

• Machine predisposed for external detergent and rinse aid

connections.

Included Accessories

• Vent cowls (left and right side)

.

• One open sided dishwasher rack for trays

.

• Rack for cups.

• Rack for dinner plates.

Optional Accessories

• Ventilation activation kit

.

• Drain water tempering kit

.

 

W
a

r

ewashing

44

 Single T

ank Conveyor Dishwasher without 

B

uilt 

I

H

ot 

W

ater

 B

ooster

 

WT44

Warewashing
44

 Single Tank Conveyor Dishwasher

without 

B

uilt 

I

H

ot 

W

ater 

B

ooster WT44

3048424

Summary of Contents for 534074

Page 1: ...erator 130 racks hr or 200 racks hr Large counter balanced inspection doors allow unrestricted all round access to the wash and rinse area Door is insulated with injected foam This adds strength as well as reduces noise and heat loss Large filters sloping towards the front to the smaller pressed filter box for quick removal Filters feature holes smaller than the concave ant block wash nozzles so l...

Page 2: ...perature 180 194 F 82 90 C Rinse pump power 0 4 hp 0 32 kW Rinse pump water flow 1 32 gal min 5 l min Initial fill water requirements 26 gal 100 liters Productivity racks per hour 200 racks 3600 dishes max speed average 18 dishes per rack Productivity racks per hour 130 racks 2340 dishes min speed average 18 dishes per rack Table to Table connection 44 1118 mm Number of Tanks 1 Height with door op...

Page 3: ...Min 400 mm Min 15 75 204 mm 8 06 102 mm 4 00 177 mm 7 00 566 mm 22 25 73 mm 2 88 623 mm 24 50 698 mm 27 50 200 mm 7 88 1037 mm 40 81 92 mm 3 63 562 mm 22 13 578 mm 22 75 1124 mm 44 25 205 mm 8 06 D DE DE1 Water drain Detergent Dispenser Connection Detergent Probe EC1 EC2 Electrical connection 1 Electrical connection 2 DE1 205 mm 8 06 174 mm 6 81 562 mm 22 13 60 mm 2 38 50 mm 1 94 116 mm 4 56 209 m...

Page 4: ...OWN PORTION OF TABLE 21 25 1 75 1 75 AWG 20 75 527 mm INSIDE TANK 21 00 533 mm OPENING 1 75 45 mm 2 25 57 mm AWG 8 00 203 mm 1 50 38 mm 8 25 210 mm 1 50 38 mm 0 63 16 mm TRACK AND TABLE MUST BE AT SAME LEVEL USE SEALANT BETWEEN TABLE AND LIP OF TANK TO PREVENT WATER LEAKAGE SECTIONAL VIEW SHOWING TABLE CONNECTIONS 27 75 705 mm 21 25 540 mm 10 63 270 mm 8 25 210 mm 0 25 7 mm CENTER LINE MACHINE AVG...

Reviews: