41
Solutions to Common Problems
OVEN CONTROL BEEPS AND DISPLAYS
"
F
"
CODE
• Electronic control has detected a fault condition. Push
CANCEL pad
to clear the
display and stop the display from beeping. Try to set a cooking function. If a fault
reoccurs, record the fault number, push the
CANCEL pad
and contact an authorized
servicer.
INSTALLATION
• Place oven rack in center of oven. Place a level on the oven rack. Contact installing
agent if rack and cabinet cutout flooring are not level.
• Kitchen cabinet misalignment may make oven appear to be not level. Be sure cabinets
are square and level. Contact cabinet maker to correct problem.
ENTIRE OVEN DOES NOT OPERATE
• When the oven is first plugged in, or when the power supply to the oven has been
interrupted, the display will flash. The oven cannot be programmed until the clock is
set.
• Be sure electrical cord is securely connected into the electrical junction box.
• Cord/plug is not installed and/or connected. Cord is not supplied with oven. Contact
your dealer, installing agent or authorized servicer.
• Service wiring not complete. Contact your dealer, installing agent or authorized
servicer.
• Power outage. Check house lights to be sure. Call your local electric company.
• Short in cord/plug. Replace cord/plug.
IMPOR
IMPOR
IMPOR
IMPOR
IMPORT
T
T
T
TANT
ANT
ANT
ANT
ANT
Before calling for service, review this list. It may save you both time and expense. This
list includes common experiences that are not the result of defective workmanship or
material in your cooktop.
Summary of Contents for 318 200 931 (0412)
Page 1: ...318 200 931 0412 Rev B Use Care Guide Built In Double Wall Oven ...
Page 7: ......
Page 8: ......
Page 9: ......