7
Removing The Doors
To remove the refrigerator door:
1
Trace lightly around the door’s top hinge with a pencil. This makes
reinstallation easier.
2
Remove the two screws from the top hinge. Lift the door off of the
bottom hinge and and set it aside.
3
Remove the three bottom hinge screws and hinge if necessary.
To reinstall the refrigerator door, reverse the above steps.
Once both doors are in place, also replace the
top hinge cover.
To remove the freezer door:
1
Detach the multi-wire cable connector
located above the top hinge. Grasp both
sides of the connector firmly and pull apart.
2
Trace lightly around the hinge with a pencil.
This makes reinstallation easier.
3
Detach the water tube from the connector
located below the freezer door. The
connector releases when you press its
outer sleeve inward.
4
Remove the screws from the top hinge.
Leave the multi-wire cable inside the hinge.
Do not unscrew the ground wire that
attaches the cable to the hinge. Lift the
door off of the bottom hinge.
5
Remove the three bottom hinge screws and
hinge if necessary.
6
Lay the door on its side to avoid damage to
the water tube extending from the bottom hinge.
To reinstall the freezer door, reverse the above steps. Once both doors are in
place, also replace the top hinge cover.
!
CA
CA
CA
CA
CAUTION
UTION
UTION
UTION
UTION
Be sure doors are set aside in a secure position
where they cannot fall and cause personal injury.
