20
Anomaly
Description
Possible causes
Actions
Lighting low or missing
• Wrong door(s) assembly (slid-
ing doors model only)
• Appliance internal issue
Refer to the chapter E.5
. If the problem
persists contact Customer Care
Service.
Unpleasant odors
during use
Dirt inside the appliance
Carry out a thorough cleaning. If
the problem persists contact Cus-
tomer Care Service.
Uneven cavity heating
• Uneven food load into the cavity
• Fan casing obstructed
Evenly distribute the load inside
the appliance.
The shelf (if present)
does not stay in place
Mechanical issue
Check the cavity support pins are
correctly inserted in the shelf slots.
If the problem persists contact
Customer Care Service.
K
APPLIANCE DISPOSAL
WARNING
Refer to “
K.1
Procedure regarding appliance disposal
At the end of the product's life-cycle, make sure it is not
dispersed in the environment.
Different regulations are in force in the various countries,
therefore comply with the provisions of the laws and compe-
tent bodies in the country where appliance disposal takes
place.
The appliance's parts must be disposed of in a differentiated
way, according to their different characteristics (e. g. metals,
oils, greases, plastic, rubber, etc.).
Before disposing of the appliance, make sure to carefully
check its physical condition, and in particular any parts of the
structure that can give or break during dismantling.
Depending on the model, the doors must be removed before
dismantling the appliance.
The symbol on the product indicates that this
product should not be treated as domestic
waste, but must be correctly disposed of in
order to prevent any negative consequences
for the environment and human health. For
further information on the recycling of this
product, contact the local dealer or agent, the
Customer Care service or the local body
responsible for waste disposal.
NOTE!
When dismantling the appliance, any marking, this
manual and other documents concerning the appli-
ance must be destroyed.