Electrolux 178478 Owner'S Manual Download Page 7

7

02552

 

LOWER CHUTE (See Fig. 5)

1.    Raise and hold defl ector shield in upright position.
2.    Place slot in lower chute over tab on mower deck and 

position lower chute over deck opening as shown.

3.   Hook rear latch into fl ange hole on back of mower 

deck.

4.    Hook front latch into tab hole on front of mower deck.

5

CAUTION: Do not remove defl ector 
shield from mower. Raise and hold 
shield when attaching lower chute 
and allow it to rest on chute while in 
operation.

REAR LATCH

FRONT 
LATCH

DEFLECTOR
SHIELD

FIG. 5

0210

1

 

UPPER CHUTE  (See Figs. 6A & 6B)

1.    Lower mower deck to its lowest cutting position.
2.   Assemble upper chute by inserting curved end into 

hole in back of cover. 

NOTE

: Handle carefully so as not to damage dump bag 

in di ca tor. 
3.    Push in and turn upper chute until it is in line with lower 

chute.

4.    Align the bosses on lower chute with alignment slots 

on upper chute and slide together.

5.    Secure with rubber latch by hooking hole in latch over 

latch pin.

6

COVER

HANDLE

LOWER 
CHUTE

DUMP BAG
INDICATOR

UPPER 
CHUTE

FIG. 6B

FIG. 6A

02100

BOSSES

LATCH PIN

ALIGNMENT
SLOT

RUBBER
LATCH

 

LEVEL MOWER DECK

Be sure deck is properly leveled for best mower per for mance.  
See your tractors owner's manual for instructions.

7

TAB

OPTIONAL FRONT
GAUGE WHEEL

Summary of Contents for 178478












Reviews: