Electrolux 1458528, User Manual

Page: 18 / 30

14 features of your appliance electrolux side by side refrigeration
Bottle twist holder operation
The bottle twist holder is used to prevent bottles from falling
over. The twist holder consists of two parts, a sliding front,
and a rotating retainer ring. The retainer ring can be rotated
through 360° but has positive locations for horizontal and
vertical positions.
The bottle twist holder can be used in two positions:
• Horizontal – when the bottle twist holder ring is horizontal,
any item that fits within the ring can simply be placed inside it.
• Vertical – when the bottle twist holder ring is vertical, it is
possible to simply slide the bottle twist holder along the
bottle retainer bar until it is pushed up against a bottle.
Note: the bottle should be constrained on the other side
by either the end of the bin or other adjacent bottles.
Crisper bin(s)
more humid
humidity control
• Storing vegetables
You can use the crisper bin to store vegetables, fruit or
small goods. You can change the humidity inside the bin
by sliding the humidity control.
You should store vegetables in the crisper bin
remembering to set the humidity control to more humid.
• Storing fruit & small goods
You can also store fruit & small goods in the crisper bin
remembering to set the humidity control to less humid.
caution
To clean a crisper cover with telescopic extension slides, simply
wipe with a damp cloth and warm soapy water. Never immerse
the cover in water, as this could affect the operation of the slide.
Telescopic freezer bins and crispers
For large side by sides with telescopic freezer bins and
crispers you can replace the drawer as follows:
1. Push the telescopic slides in all the way.
2. Slide the drawer into place over the slides and push the
bin in until it stops. The bin will not be closed all the way.
3. Open the bin to access the finger tabs at the ends of
the telescopic slides, on each side of the bin. Using your
thumb and forefinger, lift the bin over the end of the slide
and clip in place. If the drawer is not fully engaged on
the slide, it’s possible the drawer won’t stay on the slide
if fully extended.
The end of slide must
be clipped into place
4. Fully close the bin.
When replacing the drawers after cleaning, we recommend
fitting the lower drawer first.
Freezer baskets
Wire baskets are used in the compact side by side model.
All the baskets pull out for easy access and have a stop to
prevent the basket being pulled out too far.
To remove the basket, pull it out until it hits the stop then lift
the front to unhook the stop while continuing to pull forward,
until the basket is free of the runners under the shelf.