32
Fitting possibilities
On base cabinet with door
Adequate arrangements must be ensured in the construction of the cabinet, to prevent
possible contact with the overheated hob casing during operation. The recommended
solution for avoiding this problem is shown in the figure below.
The panel under the hob must be easily
removed to allow securing and release of the
hob in case of technical assistance.
4) Spread the silicone sealant around the hole, at the milling, and position the hob.
5) Carefully tighten the fixing hooks.
6) Remove any excess sealant.
60
60
1
2
min. 20
1
Removable cabinet panel
2
Possible space useful for connections
Fitting in modular cabinets (model 12550 GF-M)
60
