Electrolux Professional TD6-20 N2 Series, User Manual

Page: 16 / 24

16
User manual
Pause
It is possible to pause an ongoing program.
Select
PAUSE
and activate.
For some machines it is also possible to pause directly when pressing .
When pressing again the program will continue.
End a program
It is possible to end a program after start.
Select
END PROGRAM
and activate.
When pressing the program will be ended.
Status
Select
STATUS MENU
and activate.
The status menu shows the status for inlet air temp, outlet air temp, RMC and if the heat is on or off in the machine.
Change drum speed (only on machines with MCU)
Select
CHANGE DRUM SPEED
and activate.
Change the drum speed with the up- and down arrows and press to activate.
5.4 When program has ended
Note!
For the best possible drying result it is important to empty the machine as soon as the program has ended.
If the machine is not emptied as soon as the program has ended the drum will rotate in short intervals in order to keep
the goods from being wrinkled.
Clean the filter
The filter must be cleaned after each drying cycle.
fig.X00725A