Electrohome RR75, Manual

Page: 7 / 20

7
Turning the Unit ON/OFF
Press the STANDBY knob on the unit or POWER
button on the remote control to turn the unit
on or off.
Note: Ensure the power switch on the back of the unit is
set to ON.
Adjusting the EQ Settings
1. Press EQ on the unit or the remote to enter EQ Settings starting with Bass
2. Use or on remote or turn the TUNING knob on the unit to adjust the EQ value (-3 to +3)
3. Press EQ to change to EQ settings for Treble
4. Use or on remote or turn the TUNING knob on the unit to adjust the EQ value (-3 to +3)
5. Press EQ again to exit the EQ Settings
Playing a Record
1. Change to PHONO source
2. Lift the lid and lock the hinge to secure it
in place
3. Place a record on the turntable platter
4. Ensure the transit screw is fully lowered
5. Set the speed selection switch to match
your record
6. Remove the stylus protector from the stylus
on the end of the tonearm
7. Unlock the tonearm lock
8. Raise the cueing lever to lift the tonearm
9. Position the tonearm over the record
Adjusting the Volume
Turn the STANDBY knob on the unit or press
/- on the remote control to raise or
lower the volume on the system.
IMPORTANT: When playing music from an external source,
such as a smartphone, ensure the volume is adjusted on
it as well.
10. Lower the cueing lever to lower the
tonearm to the record
11. The turntable will automatically stop
spinning at the end of the record
12. Once playback is complete return the
tonearm to the tonearm rest and lock
in place
13. To close the lid, lift the lid to unlock the
hinge and pull the hinge toward you
allowing the lid to fully lower
See page 9 for steps on Recording from the turntable.
Changing Sources
Press the SOURCE knob on the unit or SOURCE button on the remote control to change sources. The
selected source will be shown on the display.
PHONO AUX CD USB BT FM AM
PHONO
Note: The RR75 features an auto stop function but does not have an automatic tonearm return function.
The tonearm must be manually returned to the tonearm rest. The auto stop function will automatically
stop the record once it is finished playing.