8
IMPORTANT: Only the RR36 features the Bluetooth function.
The Bluetooth function on the RR36 turntable is only designed to transmit audio to
external Bluetooth speakers/headphones.
1.
Press the Bluetooth button to turn on the Bluetooth function.
The RR36 will
enter pairing mode.
The Bluetooth LED will flash white
while
in pairing mode.
2.
Turn on your Bluetooth speakers/headphones and ensure they are also in
pairing mode. The two devices should automatically pair to each other. The
Bluetooth LED will change to solid white once connected.
3.
If pairing is not successful, press and hold the Bluetooth button for 2 seconds.
This will reset the Bluetooth pairing on the RR36 and have it enter pairing
mode.
4.
If the devices still do not connect then it is recommended to reset Bluetooth
on the speakers/headphones as well and ensure both devices are in pairing
mode at the same time.
5.
To turn off Bluetooth and resume normal RCA output press the Bluetooth
button again. The Bluetooth LED should turn off to indicate the Bluetooth
function is disabled.
NOTE:
When the Bluetooth function is enabled the RR36 will automatically attempt
to pair to the last paired device. To pair to a new device the Bluetooth button must
be held to reset pairing and enter pairing mode.
PAIRING BLUETOOTH
IMPORTANT: Only the RR36 features the USB Recording function.
The RR36 turntable features the ability to record your records directly to a USB Drive.
This turntable cannot record directly to a computer. A USB Drive formatted as FAT32
must be used.
Tip: It is recommended to have the record ready to play before starting USB Recording.
1.
Connect a USB Drive to the USB port on the top of the turntable.
2.
Press the RECORD button to start recording. The Recording LED will go solid once
recording starts.
RECORDING TO USB
