CD OPERATION
E-7
PROGRAM
Up to 20 tracks can be programmed for disc playback in any order.
Be sure to press the “STOP” button before use.
1. Press the “PROGRAM” button, the display will show “01” and flash.
2. Select desired track by using the “SKIP +” or “SKIP -” button.
3. Press the “PROGRAM” button again to confirm desired track into the program memory.
4. Repeat step 2 and 3 to enter additional tracks into the program memory.
5. When all the desired tracks have been programmed. Press the “PLAY / PAUSE” button to play the
disc in the order you have programmed and the program indicator flashes.
6. Press the “STOP” button once to terminate programmed playback and the program indicator
will turn off.
7. Press the "PROGRAM" button and then the "PLAY/PAUSE" button to resume programmed
playback.
8. Turn the "FUNCTION SELECTOR" to the "OFF" position to clear the memory programming.
OTHER FEATURES
CLOCK SETTING
To adjust the clock settings, ensure the product is in CD mode.
1. Press and hold the “TIME SET” button. (Do not release the
2. Press the “HOUR” button to set hour.
3. Press the “MIN” button to set minute.
4. Release the "TIME SET" button to confirm settings. The new changes will be displayed on
the screen.
REPEAT
Press the “REPEAT” button before or during CD playback,
each press switches the mode function as follows:
1 - REPEAT 1
2 - REPEAT ALL
REPEAT 1
REP
REP
ALL
REPEAT
ALL
NORMAL
PLAYBACK
3 - NORMAL PLAYBACK
“TIME SET” button during time setting).
