- 18 -
If you experience a problem with this unit, check the chart below before
contacting us for service.
SYMPTOM
POSSIBLE CAUSE
POSSIBLE SOLUTION
GENERAL
Power does not come on
AC cord not plugged in
Insert plug firmly into AC outlet
RADIO
No Sound
Power is not on
Press the
POWER ON/OFF
button
vOLuME control at minimum
position
Turn the vOLuME control up
Noise or sound distorted
on AM or FM
AM-interference from traffic
Turn the radio for better AM reception
FM-antenna wire not extended Extend antenna wire
SYMPTOM
POSSIBLE CAUSE
POSSIBLE SOLUTION
CLOCK
Incorrect Time
Clock not set
Set the clock
battery is inserted incorrectly,
or depleted
Check/replace the battery
Alarm does not turn on
Alarm is not set to turn on
Press the button to set ALARM 1 ;
press the button to set ALARM 2
Clock is not set
Set the clock
Alarm time is not set
Set alarm time
No display
dimmer is set to Standby Mode Press dimmer button
1. disconnect the unit from any power sources before cleaning.
2. Keep the unit away from magnetic objects, water or heat sources.
3. use a clean soft, damp cloth moistened with lukewarm water to clean the
cabinet. Never use chemical cleaners that could damage the finish of the unit.
TROUBLESHOOTING
CARE AND MAINTENANCE
SPECIFICATIONS
Summary of Contents for EAAC302
Page 21: ...NOTES ...
Page 22: ...NOTES ...