15
ENGLISH
HDMI device
DVI device
Connections to other equipment
Audio cord (not supplied)
VGA cable (not supplied)
To connect the Plasma Display to a PC (Personal Computer)
Before you connect this Plasma Display to your PC, change the adjustment of your PC’s Resolution and Refresh
rate (60 Hz).
Connect one end of a (male to male) VGA cable to the video card of the computer and the other end to the VGA
connector PC MONITOR on the back of the Plasma Display. Attach the connectors firmly with the screws on the plug.
In case of a Multimedia computer, connect the audio cables to the audio outputs of your Multimedia computer and to
the AUDIO L and R connectors of the PC AUDIO/HDMI-1 AUDIO (L/R) IN jacks of the Plasma Display.
Press
INPUT SELECT
on the remote control to select PC mode.
Switch on the computer. The Plasma Display can operate as the computer monitor.
Monitor Display modes
MODE
Resolution
Refresh rate
VGA
640x480
60Hz
WVGA
848x480
60Hz
SVGA
800x600
60Hz
XGA
1024x768
60Hz
WXGA
1280x768
60Hz
WXGA
1280x720
60Hz
WXGA
1360x768
60Hz
To return to normal mode
Press
INPUT SELECT
again.
Rear lower of the Plasma Display
To connect the Plasma Display to a HDMI or a DVI device
Rear lower of the Plasma Display
HDMI - to - DVI adapter cable
(HDMI type A connector)
(not supplied)
Audio cord (not supplied)
HDMI cable (type A connector)
(not supplied)
To DVI output
To HDMI out
or
The HDMI input receives digital audio and uncompressed video from a HDMI device or uncompressed digital video
from a DVI device.
When you connect to a DVI device with a HDMI-to-DVI adapter cable, it transfers only the video signal. Separate
analog audio cords are required.
NOTES:
•
You must choose an appropriate setting for each connection (see “Selecting the HDMI audio input source” on page
32).
•
You can also use HDMI-1 IN for DVI device connection. In this case, you must connect the audio cables to AUDIO L/
R, not AUDIO.
•
To change the TV mode to this connected device please review “Selecting the video input source” on page 19.
To PC AUDIO/HDMI-1
AUDIO (L/R) IN jacks
To PC IN
NOTES:
• The on-screen displays will have a different appearance in PC mode than in other mode.
• When you select WXGA or WVGA mode, set the WXGA INPUT or WVGA INPUT to ON in the PC PICTURE menu
(see page 34).
• To change the TV mode to this connected device please review “Selecting the video input source” on page 19.
3Y80821A_En_p12-16
6/21/06, 1:47 PM
15
