Tug Axis 5T—Operating Manual
13
Throttle lever
The throttle lever and cable do not require maintenance. Should the lever or cable suffer
damage they should be replaced. If the handle loosens with wear, the hinge nut can
be gently tightened. However, first confirm that the lever is in the correct position as it
may need to be reset. (Test by squeezing the lever slightly. The tug should slowly move,
release and the tug should completely stop).
Fuses
The control circuit is protected against inadvertent current over-loads. This fuse is
located adjacent to the controller under the top cover.
Self-resetting circuit breaker
This Tug is fitted with a self resetting circuit breaker in case of momentary over-load.
This circuit breaker can be found beneath the top cover on the battery carrier. If the unit
repeatedly over-loads, test the machine, as the motor may be damaged, and continued
use could damage the unit further.
