Salon Series
STEP 16
The unit is now ready for use.
STEP 15
Replace the four screws.
STEP 14
Replace the top, making sure the
arrow on the gold sticker lines up
with unit's rear seam.
5
Electrocorp · 1.866.667.0297 · www.electrocorp.net
STEP 6
Remove the used 0.1 micron
superHEPA filter.
Operating and Maintenance Manual
STEP 10
While wrapping the strap around
the filter make sure to exert a
reasonable amount of tension on
the strap so it is not loose once the
loop is complete.
STEP 11
Procedure ended successfully -
metal angle exerts pressure on the
edge of the superHEPA. Straps
keep the material in contact with
filter’s edges.
NEW
CARBON
STEP 12A or
Gently insert the new carbon filter
into the unit, either end up.
See page 6 for instructions on
replacing carbon filling.
STEP 12B
For 5” ultra models, use straps to
insert new carbon filter into unit.
See page 6 for instructions on
replacing carbon filling.
STEP 13
Put back the felt pad removed in
STEP 4
.
STEP 9
Place “hook” side of the velcro
strap on the inside and start
wrapping the strap around the
edge of the filter.
STEP 8
Position metal bar on the edge of
overlap after wrapping the
superHEPA around the outside of
the carbon canister.
STEP 7
Replace with a new 0.1 micron
superHEPA.
Summary of Contents for Clean Breeze III
Page 2: ...CleanBreezeIII ...