Replacing remote control batteries
Diagram 5
Replace used batteries by gently inserting your fingernail or small screwdriver in the
groove on the left side of the battery compartment cover.
Lift the cover off and insert a fresh set of batteries.
Be careful to follow the + and – polarity indications at the bottom of the battery compartment.
Battery: 2 x LR03 / AAA: 1.5Volts
Input configurations
Diagram 6
XLR input:
1 = ground
2 = positive
3 = negative
RCA:
Circle = ground
Center = positive
Output configurations
Diagram 6 and 1
XLR output:
1 = ground
2 = positive
3 = negative
Speaker:
Red = positive
Black or White = ground
RCA to XLR adopter: ECP5XLR:
1 & 3; ground and negative = shorted, 2 = positive
GB
USA
4
