background image

Electro-Voice® ZxA1 Owner’s Manual

Important Safety Instructions

1. Read these instructions. 
2. Keep these instructions. 
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water. 
6. Clean only with a dry cloth.
7.   Do not block any ventilation openings. Install in accordance with the manufacturers instructions.
8.   Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus  (including amplifiers) that  produce heat.
9.   Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A  grounding 
type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your 
outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Unplug this apparatus during lightning storms or when unused for long periods of time. 
13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord 
or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate 
normally, or has been dropped
14. To completely disconnect AC power from this apparatus, the power supply cord must be unplugged.
15. Do not expose this apparatus to dripping or splashing and ensure that no objects filled with liquids, such as vases, are placed on this apparatus.
16. The AC plug of the power supply cord shall remain readily operable.

The lightning flash with arrowhead symbol, within an equilateral 
triangle is intended to alert the user to the presence of uninsu-
lated “dangerous voltage” within the product’s enclosure that 
may be of sufficient magnitude to constitute a risk of electric 
shock to persons.

The exclamation point within an equilateral triangle is intended 
to alert the user to the presence of important operating and 
maintenance (servicing) instructions in the literature accompa-
nying the appliance.

The asterisk within an equilateral triangle is intended to inform 
the user to necessary installation or removal instructions re-
garding equipment or hardware use relating to the system.

2

Management of WEEE (waste electrical and electronic equipment) (applicable in Member 
States of the European Union and other European countries with individual national policies 
on the management of WEEE) The symbol on the product or on its packaging indicates that 
this product may not be treated as regular household waste, but has to be disposed through 
returning it at an Electro-Voice dealer.

WARNING:

 

TO REDUCE THE RISK OF FIRE OR ELECTRIC 

SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

AVIS:

 

RISQUE DE CHOC ELECTRIQUE. NE PAS OUVRIR.

WARNING:

 

CONNECT ONLY TO MAINS SOCKET WITH PRO-

TECTIVE EARTHING CONNECTION.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

• Electro-Voice does not recommend use of ZxA1 speakers outdoors in direct exposure envi-
ronments.

• Electro-Voice ZxA1 loudspeakers are easily capable of generating sound pressure levels suf-
ficient to cause permanent hearing damage to anyone within normal coverage distance. Caution 
should be taken to avoid prolonged exposure to sound pressure levels exceeding 90 dB.

• For trouble-free operation, exceeding a maximum ambient temperature of +40°C (104°F) is 
not permissable. 

This is a Class A product according to FCC rules.  In a domestic environment this product may cause 
radio interferences in which case the user may be required to take adequate measures.

Summary of Contents for ZxA1-100B













Reviews: