ZLX Powered Loudspeaker Series
Description | en
11
Electro-Voice
Installation manual
2018.04 | 01 | F.01U.349.854
Gain structuring
After pairing your mobile device with the system, you can set the volume for your streaming
device.
To
set the volume for your streaming device
, do the following:
1.
Set the loudspeaker
output gain
to MUTE.
2.
Start playing music from your desired
player/source
.
3.
Increase the
volume
on your mobile device.
The BT VU meter on the ZLX loudspeaker's LCD responds to the incoming signal.
4.
Increase the
volume
from your device until the BT VU meter is ~75% full.
Take note of the volume slider on your mobile device as well: to prevent clipping, do not go
past this level.
5.
Using the
MASTER VOL
knob, increase the output gain to the desired listening level.
Be mindful of the CLIP and LIMIT notifications.
6.
Turn the
level
down on your mobile device for convenient volume control (optional).
To prevent clipping, do not exceed the level previously observed (~75% BT VU).
See also
–
DSP controls, page 18
