1.
Attach the U-bracket to the wall using fasteners suitable for the wall material (not
supplied).
2.
Follow the Installing ZLX Mounts installation instructions but install the upper and lower
mounts on the opposite handles.
Note: the upper mount will be attached to where the lower handle was located and the
lower mount will be attached to where the upper handle was located.
Lower Mount
HF Right
HF Left
Figure 2.8: ZLX HF on the Left—Horizontal
3.
Lift the loudspeaker and rotate the loudspeaker to a horizontal position where the side
handle is on the bottom.
4.
Lift the loudspeaker and place the lower mount (positioned on the left side) onto the
pivot pin on left side of the U-bracket. (See Figure 2.6)
5.
Guide the upper mount (positioned on the right side) and ensure the lower U-bracket
pivot pin is securely placed in the notch.
The loudspeaker is loosely hung; gently allow the loudspeaker to rest against the mounting
surface.
6.
Position the loudspeaker for the desired angle. (See Figure 2.4.)
7.
Insert and tighten the two (2) screws (supplied) sufficiently so that the loudspeaker does
not inadvertently rotate. (See Figure 2.7)
en
9
Electro Voice
01 | F01U285494
