U.S.A. and Canada only. For customer orders, contact Customer Service at:
800/392-3497 Fax: 800/955-6831
Europe, Africa, and Middle East only. For customer orders, contact Customer Service at:
+ 49 9421-706 0 Fax: + 49 9421-706 265
Other International locations. For customer orders, contact Customer Service at:
+ 1 952 884-4051 Fax: + 1 952 736-4212
For warranty repair or service information, contact the Service Repair department at:
800/685-2606
For technical assistance, contact Technical Support at: 866/78AUDIO
Specifications subject to change without notice.
12000 Portland Avenue South, Burnsville, MN 55337
Phone: 952/884-4051, Fax: 952/884-0043
www.electrovoice.com
© Telex Communications, Inc. 2/2005
Part Number 38110-366 Rev. A
Architectural & Engineering Specs:
Dimension Drawings:
Xi-2122MHA/64F Part Numbers
•
1125-3442 - Black
•
1125-3445 - White
The loudspeaker system shall be a two-way bi-amp system. The system shall have dual 12-inch, fully horn-loaded mid-bass
drivers with 2.5-inch voice coils and a nominal impedance of 4 ohms. The mid-bass drivers shall have a power-handling capacity of
600 watts for 8 hours (as per ANSI/EIA RS-426 A & AES 2-1984). The high-frequency section shall be coaxially mounted in the mid-
bass horn and shall employ dual compression drivers capable of handling 300 watts, 1,760- to 20,000-Hz when pink noise of a 6-
dB crest factor is applied for 2 hours (as per AES 2-1984 and ANSI S4.26-1984 standards). The loudspeaker shall be constructed of
18-mm, 13-ply birch and shall be trapezoidal in shape. The wedge angle shall be 18-degrees. The grille shall be constructed from
16 GA powder-coated steel backed by acoustically transparent fabric. The system shall be capable of very-high level operation with
a band width of 125 to 20,000 Hz. The system dimensions shall be 586 mm (23.07 inches) wide by 914 mm (36.00 inches) high by
759 mm (29.88 inches) deep. The system shall employ flying hardware of a “track” style and two tracks on the enclosure top and
two tracks on the enclosure bottom. Net weight shall be 86.3 kg (190 lbs).
The loudspeaker shall be the Electro-Voice
®
Xi-2122MHA/42F.
This Xi Loudspeaker should be suspended overhead only in accordance with the procedures and limitations specified in the
X-Array Xi Install Flying Manual and possible manual update notices. This system should be suspended with certified rigging
hardware by an authorized rigging professional and in compliance with local, state, and federal overhead suspension ordinances.
CAUTION
Performance Match
• P3000 (RL)
• CPS 2.8
• Dx38
• P1200 (RL)
• CPS 2.11
Wiring/Connection Chart:
