background image

Xb Bass System

Xb Bass System

88 88

8

600 Cecil Street, Buchanan, MI 49107

616/695-6831, 616/695-1304 Fax

Specifications

Frequency Response (measured in far
field, with and without crossover and
equalization, calculated to one meter on
axis, swept sine wave, one watt into
system - 2.00 V at 70 Hz, anechoic
environment; see Figure 2):

37-200 Hz

Crossover Frequency:

125 Hz

Efficiency Mid Band:

5.3 %

Maximum Long-Term-Average Power-
Handling Capacity (per ANSI/EIA RS-
426A 1980):

1,200 watts

Maximum Long-Term-Average Mid-
Band Acoustic Output, LF/HF:

64 acoustic watts

Sensitivity (SPL at one meter, indicated
input power, anechoic environment,
average level),

1 watt:

98.5 dB

1,200 watts:

129.3 dB

Beamwidth (angle included by 6-dB-
down points on polar responses,
indicated one-third-octave bands of pink
noise; see Figures 1 and 3),

Horizontal, 63-200 Hz:

 240° (+120°, -60°)

Vertical, 63-200 Hz:

300° (+60°, -120°)

Directivity Factor, R

          

(Q), 63-200 Hz

Average (see Figure 4):

2.2 (+0.8, -0.4)

Directivity Index, D

i

, 63-200 Hz

Average (see Figure 4):

3.4 dB (+1.4 dB, -0.9 dB)

Distortion  (115 dB SPL at one meter,
shaped spectrum; see Figure 5),

Second Harmonic,

40 Hz:

2.2%

80 Hz:

0.9  %

Third Harmonic,

40 Hz:

0.4 %

80 Hz:

0.2 %

Transducer Complement,

Two EVX-180B 18-in. woofers

Impedance (see Figure 6),

Nominal:

Two 8-ohm loads

Minimum:

Two 6.4-ohm loads

Input Connections:

Two Neutrik NL8MPR Speakon

®

connectors paralleled

Recommended Amplifier Power, Rating:

800 watts per channel @ 8 ohms
(93-volts rms short term)

Enclosure Construction,

Enclosure Shell:

18-mm, 13-ply birch plywood

Finish:

Black textured paint

Grille:

Powder-coated steel with foam

Rigging: EV Proprietary hinge system at

rear. Heavy-duty L-track on front
which accepts New Haven NH32102-2
double-stud fittings

Dimensions,

Height:

914.4 mm (36.00 in.)

Width (front):

584.2 mm (23.00 in.)

Width (back):

353.8 mm (13.93 in.)

Depth:

758.8 mm (29.88 in.)

Angle:

18° wedge

Net Weight:

83.5 kg (184 lb)

Shipping Weight:

87.5 kg (193 lb)

Part Number 534636 Rev. B—9934

SPEAKERS—X-Array

TM

©Telex Communications, Inc., 1999 • Litho in U.S.A.

Figure 8—Dimensions

Summary of Contents for X-Array XB









Reviews: