Electro-Voice TL606DMT Brochure & Specs Download Page 8

TL606DMT Low

-Frequency Speak

er System

TL606DMT Low-Frequency Speaker System

8

specifications

Frequency Response, 10 Feet on Axis,

Swept One-Third-Octave Pink Noise,
Half-Space Anechoic Environment
(see Figure 1):
40-3,500 Hz

Low-Frequency 3-dB-Down Point,

Normal:
40 Hz

Usable Low-Frequency Limit (10-dB-

down point), Normal:
30 Hz

Half-Space Reference Efficiency:

5.8%

Long-Term Average Power Handling
Capacity per EIA Standard RS-426A
(see Power Handling Capacity section):

800 watts

Maximum Long-Term Average Mid-
Baud Acoustic Output:

11.6 watts

Sound Pressure Level at 1 Meter, 1
Watt Input, Anechoic Environment,
Band-Limited Pink-Noise Signal,

100-800 Hz:

100 dB

40-125 Hz:

96 dB

Dispersion Angle Included by 6-dB-
Down Points on Polar Responses,
Indicated One-Third-Octave Bands of
Pink Noise (see Figure 3),

40-125 Hz Horizontal and Vertical:

360°

400-800 Hz Horizontal:

120° ±12°

400-800 Hz Vertical:

55° ±14°

Directivity Factor R

q

 (Q), Median Over

Indicated Range (see Figure 4),

40-125 Hz:

1.8

400-800 Hz:

5.7

Directivity Index D

i

, Median Over

Indicated Range (see Figure 4),

40-125 Hz:

0.0 dB

400-800 Hz:

7.6 dB

Distortion, 0.1 Full Power Input (see
Figure 5),

Second Harmonic,

100 Hz:
   0.45%

500 Hz:

   0.28%

Third Harmonic,

100 Hz:
   0.14%
500 Hz:
   0.89%

Transducer Complement:

Two DL15MT woofers

Box Tuning Frequency:

40 Hz

Impedance, Minimum:

4 ohms

Input Connections:

Screw terminals (#8-32) on barrier strip

Enclosure Materials and Finish:

Black, vinyl-clad particle board

Suspension (see Suspending TL606DW
Enclosures section):

Two “independently certified” suspen-
sion kits are available, the HS6 and HS7

Dimensions,

Height:

100.3 cm (39.5 in.)

Width:

57.2 cm (22.5 in.)

Depth:

44.7 cm (17.6 in.)

Net Weight:

49.0 kg (108 lb)

Shipping Weight:

54.4 kg (120 lb)

SPEAKERS - Low-Frequency

Part Number 534628 — 9833

600 Cecil Street, Buchanan, MI 49107

800/234-6831, 616/695-6831, 616/695-1304 Fax, www.electrovoice.com

©Telex Communications, Inc. 1998 • Litho in U.S.A.

Summary of Contents for TL606DMT









Reviews: