Electro-Voice SxA360, Owner'S Manual

Page: 6 / 20

6 7
SIGNAL
indicates the presence
of an input signal.
CLIP
brief blinking indicates that the power
amplifier is operated at its limits. Short-term
blinking is uncritical, because the integrated
limiter compensates minor distortion. Constant
lighting of the LED indicates that the sound is
negatively affected. Reducing the output volume
is strongly recommended.
INPUT
Electronically balanced input
for the connection of high-
level signal sources like mixing
consoles or signal processors.
Connections can be established
using phone or alternatively
XLR-type connectors.
Caution: Preventing the
occurrence of spurious noise.
Prior to connecting/
disconnecting the input,
set the level control to its
counterclockwise stop.
OUTPUT
This connector is connected in
parallel to the input allowing the
through connection of the input
audio signal.
LEVEL
dB-scaled level control for
adjusting the power amp’s
overall amplification. To prevent
distortion and clipping of pre-
linked mixing consoles, the
control should generally be set
to a value between 0dB and
+6dB.
MAINS IN
Mains connector is carried out
as PowerCon-type socket. A
fitting mains cord (5m) with
PowerCon-type plug is supplied.
POWER
Mains switch for powering the appliance on or off. With
the power amplifier being switched on, the mains switch
is backlit. If, after switching the power on, the switch
is not backlit, please first check whether the mains
cord is correctly connected. In case the cord has been
connected correctly and the switch still fails to light (no
function), please contact your specialist dealer.
Figure 1:
Rear Panel SxA360